

Waveshare RP2350-USB-A Mini Development Board - RP2350A, USB-A Host Port, 520 KB SRAM
The Waveshare RP2350-USB-A is a 33 × 17.5 mm development board built around the Raspberry Pi RP2350A - and its headline trick is the full-size USB Type-A port…
- Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
- Cash on deliveryPay when your parcel arrives
- 7-day checking warrantyDead-on-arrival items replaced
- Packed with careAnti-static & padded packaging
Highlights
- ⚡ Dual-core, dual-architecture RP2350A - run two Arm Cortex-M33 cores or two Hazard3 RISC-V cores, with a flexible clock up to 150 MHz.
- 🔧 15 multi-function GPIO - 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC and 14 controllable PWM channels, all remappable across the pins.
- 🌈 Onboard WS2812 RGB LED - a full-colour status indicator on GP16, plus dedicated BOOT and RESET buttons.
- 🔋 RT9013-33GB 500 mA LDO - low-noise, ultra-fast-response regulation, with low-power sleep and dormant modes for battery work.
- USB 2.0 Type-A connector - USB host or device via PIO
- USB Type-C connector - programming and power; USB 1.1 with device and host support
- RP2350A - dual-core, dual-architecture MCU up to 150 MHz
- W25Q16JVUXIQ - 2 MB NOR flash
Specifications
- Part number
- RP2350-USB-A (Waveshare)
- Microcontroller
- Raspberry Pi RP2350A
- CPU cores
- Dual Arm Cortex-M33 or dual Hazard3 RISC-V
- Clock speed
- Flexible, up to 150 MHz
- SRAM
- 520 KB
- Flash
- 2 MB onboard NOR flash (W25Q16JVUXIQ)
- GPIO
- 15 multi-function pins
- ADC
- 4 × 12-bit
- Serial interfaces
- 2 × SPI, 2 × I2C, 2 × UART
- PWM
- 14 controllable channels
- PIO
- 12 state machines
- USB
- Type-C (USB 1.1, device and host) + Type-A expansion port via PIO (USB 2.0/1.1 compatible)
- Regulator
- RT9013-33GB, 500 mA LDO
- Indicator
- WS2812 RGB LED on GP16
About this product
The Waveshare RP2350-USB-A is a 33 × 17.5 mm development board built around the Raspberry Pi RP2350A - and its headline trick is the full-size USB Type-A port on board. Driven through the RP2350's PIO block, that port lets the microcontroller act as a USB host, so a keyboard, mouse, gamepad or other USB device plugs straight into your project instead of needing a separate host controller.
A second USB Type-C connector handles power and programming, with the usual drag-and-drop UF2 flashing over USB mass storage. Underneath sits the same dual-core, dual-architecture silicon as the Raspberry Pi Pico 2: two Arm Cortex-M33 cores or two Hazard3 RISC-V cores at up to 150 MHz , 520 KB of SRAM and 2 MB of onboard flash. Castellated edges mean the whole RP2350-USB-A mini development board can be reflow-soldered onto your own carrier PCB once the prototype works.
Key Features
•🔌 Onboard USB Type-A host port - implemented via PIO and compatible with USB 2.0/1.1 transmission, so the board can talk to standard USB peripherals directly.
•🧠 520 KB SRAM and 2 MB onboard flash - a W25Q16JVUXIQ NOR flash holds your program, with accelerated floating-point libraries built into the chip.
•🎛️ 12 PIO state machines - the programmable IO blocks that make the USB-A port possible, and that you can reuse for custom protocols, LED strips or precise timing.
•📏 Castellated mini form factor - 33.0 × 17.5 mm on a…
Related searches
You may also need
More Dev Boards →








