Mach3 USB CNC Interface Board BL-usbmach-V2.0 Mach3 CNC Board

5-Axis 100KHz USB CNC Controller Card for Mach3 lets you use any Windows Computer to be used as CNC Machine Controller. Previously with LPT Port-Based Cards, the user was limited to use only older computers which had LPT Port. With this New CNC Control Board, you can even run Mach3 on a Windows Tablet which can give a more compact and professional look to your CNC Machine. Technical Specifications • PWM output is available ( ( photocoupler separated,5V) ，can be used to control the spindle speed controller that controlled by PWM. • Four output ports are available， can be connected to relay modules with photocouplers, to control flood and mist, etc. Mach3 USB interface board BL-UsbMACH-V20 manual • It can be connected to stepper motor drivers using common anode or common cathode input connection.Note: stepper motor drivers should have photocouplers for input. • Also, provide 5 axis XH2.54-4P 2.54mm Socket Connector ，make it is easy to connect to the stepper motor drivers. stepper motor drivers. • All the port names are printed on board, Easy to be used Specifications: • Limit switches: Yes (5 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device) • Optical Isolation between USB Side Control and External inputs: Yes • Isolated Outputs: 4 general-purpose isolated relay drive output interface (can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device) • Tested with the following Operating Systems: • Windows XP (direct) • Windows 7 64bit /32Bit (direct) • Windows 10 (Indirect using Windows XP on VMWare) Setup Instructions • •

Step 2: Download the USB Motion Drive r…