

1865O Battery Holder Double Li-ion V8 Battery Shield Micro USB Type C USB Charging Ports
This module is a portable mobile power supply that supports 3V / 1A and 5V / 3A two voltage outputs
- Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
- Cash on deliveryPay when your parcel arrives
- 7-day checking warrantyDead-on-arrival items replaced
- Packed with careAnti-static & padded packaging
Highlights
- This module is a portable mobile power supply that supports 3V / 1A and 5V / 3A two voltage outputs
- This mobile power supply has a built-in lithium battery protection IC, which has overcurrent, overvoltage, under-voltage, etc.
- LED indicator(Green means full, Red means charging)
- Supports 3V 1A voltage outputs.
- Supports 5V 2.2A voltage outputs.
- Output parameter 5V / 3A or 3V / 1A.
- Conversion efficiency up to 95% (high conversion rate).
- 1.8A charge, 3A discharge, highly integrated mobile power IC.
About this product
•4 level LED lights show power, the default boot is always in working state, you need to manually shut down (if necessary, change to non-working state automatic shutdown mode, just cut off the middle line of the “NC” bit or remove the “ROUT” resistor)
5V voltage output rated current is 2.2A, maximum support 3A current (not recommended for overload, easy to damage the module, speed up the service life)
1865O Battery Holder Double Li-ion V8 Battery Shield Micro USB 5V/3A 3V/1A Power Bank Battery Charging Module for Raspberry Pi and Arduino ESP32
•Supports up to two Li-ion batteries. It is recommended to use two 18650 batteries, which can be longer! The cell has to be 65mm.
•Special attention: the installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative! Installation errors will burn out the module!
•Click to boot.
•Double click the button to shut down (not automatic shut-off mode). If you need to change the non-automatic shut-off mode, please read the third point of the product parameters.
•4 road LED status indicator, automatically turn off after 3 seconds, the battery is less than 3 V alarm 6 protection, less than 2.4 V full shutdown, no action.
•Battery…
Related searches
You may also need
More Dev Boards →








