Skip to content

Cash on Delivery all over Pakistan · Free delivery in Islamabad & Rawalpindi above Rs 5,000

PakCircuit
VigorTree VT-SG1224 Process Signal Generator - ±12V Voltage & 0-24mA (4-20mA) Current Output, 1.69" Color TFT, RS485 Modbus, USB-C
VigorTreeOscilloscopes & AnalyzersCode 4f885d8ca5

VigorTree VT-SG1224 Process Signal Generator - ±12V Voltage & 0-24mA (4-20mA) Current Output, 1.69" Color TFT, RS485 Modbus, USB-C

VigorTree VT-SG1224 is a palm-sized process signal generator that outputs a precise ±12 V voltage or 0-24 mA current signal (including the standard 4-20 mA…

Rs 12,000
In stock Price updated 15 Nov 2026
Total: Rs 12,000
  • Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
  • Cash on deliveryPay when your parcel arrives
  • 7-day checking warrantyDead-on-arrival items replaced
  • Packed with careAnti-static & padded packaging

Highlights

  • ⚡ Voltage and current in one unit - ±12 V in 10 ranges (incl. 0-10 V, 0-5 V, 0-3.3 V) and 0-24 mA in 4 ranges (incl. 4-20 mA)
  • 📏 Factory calibrated - 0.01 V / 0.01 mA resolution with ±0.03 V / ±0.05 mA accuracy; multi-point recalibration from the PC software
  • 🔁 3 output modes - Normal (actual / percent / custom value), Quick (up to 9 preset points, switched with the dial) and Curve
  • 📈 Curve mode - up to 20 segments with start, end and duration each; run continuously, 1-99 cycles, or once
  • 🔧 RS485 Modbus RTU slave - address 1-247, 4800-115200 baud, for PLC, HMI and SCADA control
  • 💻 VigorTree Studio PC software - live charts, curve table editing, calibration and firmware updates (Windows / macOS / Linux)
  • 🖥️ 1.69" color TFT (320 × 240) - output value, range and running segment in real time; 3 brightness levels
  • 🎛️ One-hand control - flick the SET dial to select/adjust, press to confirm, OK button switches output on/off

Specifications

Brand / Model
VigorTree VT-SG1224
Voltage output
−12 to +12 V, 10 ranges (−12~12, −10~10, −5~5, 0~12, 0~10, 0~5, 0~3.3, 2~12, 4~10, −12~0 V)
Voltage resolution / accuracy
0.01 V / ±0.03 V
Current output
0-24 mA, 4 ranges (0~24, 0~22, 0~20, 4~20 mA)
Current resolution / accuracy
0.01 mA / ±0.05 mA
Current load
≤ 500 Ω
Current loop modes
Active output, or passive mode with external 24 V
Output modes
Normal / Quick (9 points) / Curve (20 segments, 1-99 cycles)
Display
1.69-inch color TFT, 320 × 240
Controls
SET dial + output switch
UI languages
English / Simplified Chinese / Traditional Chinese
Communication
RS485, Modbus RTU slave; address 1-247; 4800, 9600, 38400, 57600, 115200 bps; 8-N-1, CRC16
PC software
VigorTree Studio (Windows / macOS / Linux)
Terminal
8-pin pluggable: V+, GND (power), IO (current out), I+ (24 V in, passive), GND (signal), VO (voltage out), 485A, 485B

About this product

VigorTree VT-SG1224 is a palm-sized process signal generator that outputs a precise ±12 V voltage or 0-24 mA current signal (including the standard 4-20 mA loop range) to test and calibrate PLC analog inputs, transmitters, panel meters, VFDs and actuators. Output is set in 0.01 V / 0.01 mA steps with ±0.03 V / ±0.05 mA precision.

A 1.69-inch color TFT shows the live output, start/end values and timing at a glance. Beyond fixed output, it can run programmed ramps and multi-segment curves, and it can be controlled from a PLC over RS485 Modbus RTU or from the VigorTree PC software. It runs from USB-C power, so a power bank or laptop is enough on site.

Key Features

•🔌 Pluggable 8-pin terminal - pin names printed on the plug; powered from DC 5-30 V terminal or 5 V USB-C

•🔋 Smaller than a bank card - 58.7 × 50.6 × 19 mm, about 150 g

Technical…

Related searches

You may also need

More Tools →