UNI-T UTS3036B 3.6 GHz Performance-Series Spectrum Analyzer

Highlights

• 9 kHz - 3.6 GHz frequency coverage - sub-3.6 GHz for general RF dev, communications, harmonic surveys, and EMI pre-compliance work
• -161 dBm/Hz typical DANL - (preamp on) - sensitive enough to resolve low-level signals, spurs, and harmonic energy near the noise floor
• 1 Hz - 3 MHz RBW - in 1-3-10 steps - fine resolution control all the way down to a 1 Hz floor, with FFT mode for faster narrowband sweeps
• 40,001 sweep points - deep trace detail (4× the count of UNI-T's entry tier) for catching signals that coarser analyzers miss
• 10.1-inch capacitive multi-touch display - (1280 × 800) - pinch, drag, and tap to set markers, with full mouse/keyboard support via USB
• Six traces with five detector modes - Sample, Peak, Negative, Normal, Average; Clear/Write, Average, Max Hold, Min Hold trace types
• Power cord
• USB2.0 printing cable

Specifications

Frequency Range

9 kHz - 3.6 GHz

Phase Noise

<-98 dBc/Hz @ 10 kHz offset (typical, 1 GHz carrier)

Amplitude Accuracy

<0.7 dB

Sweep Points (max)

40,001

Number of Traces

6

Detector Types

Sample, Peak, Negative, Normal, Average

Trace Types

Clear/Write, Average, Max Hold, Min Hold

Sweep Modes

Swept, FFT

Preamplifier

20 dB (nominal), switchable

Input Attenuator Range

0-51 dB, 1 dB steps

Reference Level Range

100 dBm to +30 dBm

Maximum Safe Input

+33 dBm CW (3 min, attenuation >20 dB); 50 V DC max

About this product

Related searches