Skip to content

Cash on Delivery all over Pakistan · Free delivery in Islamabad & Rawalpindi above Rs 5,000

PakCircuit
Sugon 212 2 in 1 Hot Air Rework Station with T12 Soldering Iron
SUGONSoldering & ReworkCode b59ff7f26d

Sugon 212 2 in 1 Hot Air Rework Station with T12 Soldering Iron

The Sugon 212 pairs a hot air rework gun with a genuine T12 soldering iron in a single 760W unit that runs straight off 220VAC 50Hz mains, so it plugs into a…

Rs 30,000
In stock Price updated 15 Nov 2026
Total: Rs 30,000
  • Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
  • Cash on deliveryPay when your parcel arrives
  • 7-day checking warrantyDead-on-arrival items replaced
  • Packed with careAnti-static & padded packaging

Highlights

  • 🔥 2 in 1 station - hot air rework gun and T12 soldering iron integrated in one 760W unit.
  • ⚡ Genuine T12 cartridge iron - heater and tip in one body for fast heat-up and quick thermal recovery on heavy joints.
  • 🌡️ 200 to 500 degree C range - covers leaded and lead-free work, from fine SMD to heavy ground planes.
  • 🔢 Three memory channels per tool - CH1, CH2 and CH3 store your temperature and airflow combinations for one-press recall.
  • 🌀 Brushless fan - quieter running and a longer service life than the brushed pumps used in cheaper hot air stations.
  • 🔌 Independent power switches - run the iron alone without spinning up the hot air side, or the reverse.
  • 💤 Automatic sleep, 0 to 30 minutes - the iron powers down on its own via the stand cable, which protects the tip and saves power.
  • 🎯 Temperature calibration - trim the reading against a reference so the display matches the real tip temperature.

Specifications

Brand
SUGON
Model
212 (2in1 rework station)
Type
2 in 1 hot air rework station with T12 soldering iron
Input
220VAC, 50Hz
Maximum power
760W
Fuse
5A
Temperature range
200 to 500 degrees C
Iron type
T12 cartridge (integrated heater and tip)
Air source
brushless fan
Display
digital, showing set temperature and actual temperature plus airflow
Control
temperature and airflow set by buttons
Memory presets
3 channels (CH1, CH2, CH3) per tool
Power switches
separate for hot air gun and soldering iron
Sleep mode
automatic, adjustable 0 to 30 minutes

About this product

The Sugon 212 pairs a hot air rework gun with a genuine T12 soldering iron in a single 760W unit that runs straight off 220VAC 50Hz mains, so it plugs into a Pakistani socket with no converter. The T12 side is the reason to pick this over a generic 2 in 1 station: the heating element and the tip are one cartridge sitting millimetres from the joint, so the iron reaches working temperature in seconds and recovers almost instantly on a large ground pad instead of stalling the way a long-barrel iron does.

Both tools run from the same panel, each with its own power switch, and the display carries four readouts at once - hot air temperature and airflow on the left, iron set temperature and actual temperature on the right - so you can see the tip catching up rather than guessing. Three memory channels, marked CH1, CH2 and CH3 for each tool, hold the profiles you actually use. A brushless fan drives the hot air, which is noticeably quieter than the brushed diaphragm pumps in budget stations and lasts considerably longer. Automatic sleep, adjustable from 0 to 30 minutes, drops the iron when you set it in the stand so tips are not cooked through a tea break.

Key Features

•🖥️ Four-value display - hot air temperature and airflow alongside the iron set temperature and actual temperature, so you can watch the tip recover.

•🔢 Three memory channels per tool - CH1, CH2 and CH3 store your temperature and…

Related searches

You may also need

More Tools →