OLED DisplaysCode a32eb12887

OLED Display Module 12864 0.96 Inch 4Pin

Name: OLED Display Module 12864 0.96 Inch 4Pin
SKU: a32eb12887
Price: 549 PKR
Availability: InStock

The display is self-illuminating

Rs 549Rs 600-9%

In stock Price updated 15 Nov 2026

Total: Rs 549

Order on WhatsApp

Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
Cash on deliveryPay when your parcel arrives
7-day checking warrantyDead-on-arrival items replaced
Packed with careAnti-static & padded packaging

Highlights

No need of the backlight
The display is self-illuminating
Power requirement is low
They are offering the large viewing angle
Full Compatible with Arduino
Factory configured for SPI protocol (can easily change to IIC)
Better performance characteristics than traditional LCD and LED displays.
Only Need 2 I/O Port Control

Specifications

High resolution: 128X64 (and 12864LCD the same resolution, but the OLED screen more pixels per unit area)
Super wide viewing angle: more than 160 ° (maximum viewing angle display a screen)
Ultra-low power consumption: normal display 0.06W (far below the TFT display)
Wide supply range: DC 3V-5V (without any changes, directly compatible with common 3.3V and 5V power supply system)
Industrial grade: Operating temperature range -30 degree ~ 70 degree
The ultra-small size: (length) 27.8MM * (W) 27.3MM * (thickness) 4.3MM
Color: Any

About this product

OLED LCD Display 0.96″ Inch DC 3-5V 4 Pin 12864 128×64 Pixel

0.96 Inch OLED Display 0.96 Inch DC 3-5V 4 Pin Leads Header 12864 128×64 Pixel IIC I2C Interface Communicate OLED Display Module For Arduino

These displays are small, only about 1in diameter, but very readable due to the high contrast of an OLED display. This display is made of 128×64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness!

This breakout can be used with either an SPI or I2C interface - selectable by soldering two jumpers on the back. The design is completely 5V-ready, with an onboard regulator and built in boost converter. It’s easier than ever to connect directly to your 3.3V or 5V microcontroller or single board computer!

•With chip select CS signal, you can achieve multiple SPI or IIC device on the same bus work

•Compatible with 3.3V and 5V control chip I / O level (without any set, directly compatible)

•OLED screen, internal drive chip: SSD1306

•Better performance…