

LJ12A3-4-Z/BY PNP NO Inductive Proximity Sensor Switch DC 6V-36V
• Model: LJ12A3-4-Z BY • Distance Detection Capability: 4mm • Operating Voltage: DC 6V - 36V • Output Type: Digital PNP • SEO Technology: Switching Enhanced…
- Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
- Cash on deliveryPay when your parcel arrives
- 7-day checking warrantyDead-on-arrival items replaced
- Packed with careAnti-static & padded packaging
Highlights
- Power supply reversal connection protection; short-circuit protection can directly connect with PLC
- Used in common places with Medium environment resistance
- Red LED indicates that it’s available to detect the sensor operation state
- Economical and simple operation
- Widely used, it can be a substitution for min-type switch and limit switch
- IP 67 Water protection
- High Repeated Positioning Accuracy.
Specifications
- Model
- LJ12A3-4-Z BY
- Distance Detection Capability
- 4mm
- Operating Voltage
- DC 6V - 36V
- Output Type
- Digital PNP
- SEO Technology
- Switching Enhanced Operation
- Protection Rating
- IP67 (Resistance to dust and water)
- Operating Temperature Range
- 25°C to +70°C
- Cable Length
- Typically 2 meters, or can be optionally specified
- Protections
- Short circuit, overcurrent, and reverse polarity protections
- Mounting
- M12 connector or cable connection options
- Indicator Light
- LED indicator showing detection status
- Material
- Options of metal or plastic body
- Wire type and power
- DC 3-wire type 6-36VDC
About this product
LJ12A3-4-Z/BY PNP Inductive Proximity Sensor Switch DC 6V-36V NO 3-Wire 4mm
The LJ12A3-4-Z/BY is a 3-wire inductive proximity sensor designed for non-contact metal detection. It features an PNP transistor output with Normally Open (NO) logic, meaning the signal wire stays “Open” (High Impedance) until a metal object is detected within its 4mm range, at which point it pulls the signal to Ground (Sink).
Wiring & Pinout
The sensor typically follows a standard 3-wire color code:
Usage Tips
•Microcontroller Connection: Because the sensor operates at a minimum of 6V, its signal output can damage 5V or 3.3V microcontrollers like Arduino. You should use a voltage divider or a zener diode to drop the black wire’s voltage to a safe level for your board.
•Object Detection: Inductive sensors only detect conductive metals (iron, steel, aluminum, copper). Non-ferrous metals like aluminum will significantly reduce the effective sensing distance compared to iron.
Related searches
You may also need
More Sensors →








