Motor DriversCode 4e64aa4d30
L293D IC Dual H-bridge Motor Driver
The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive…
- Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
- Cash on deliveryPay when your parcel arrives
- 7-day checking warrantyDead-on-arrival items replaced
- Packed with careAnti-static & padded packaging
Highlights
- It can be used to run Two DC motors with the same IC.
- Speed and Direction control is possible
- Automatic Thermal shutdown is available
- Available in 16-pin DIP, TSSOP, SOIC packages
- Module 5V (VCC) - Arduino 5V.
- Module GND - Arduino GND.
- Module 1 - Arduino D8.
- Module 2 - Arduino D9.
Specifications
- Pin Number
- Pin Name
- Input 1
- Input 2
- Motor voltage Vcc2 (Vs)
- 4.5V to 36V
- Maximum Peak motor current
- 1.2A
- Supply Voltage to Vcc1(VSS)
- 4.5V to 7V
- Transition time
- 300ns (at 5Vand 24V)
About this product
The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz. The L293D is assembled in a 16 lead plastic package that has 4 center pins connected together and used for heatsinking. L293D Pin Configuration Pin Number | Pin Name | Description | 1 | Enable 1,2 | This pin enables the input pin Input 1(2) and Input 2(7) | 2 | Input 1 | Directly controls the Output 1 pin. Controlled by digital circuits | 3 | Output 1 | Connected to one end of Motor 1 | 4 | Ground | Ground pins are connected to ground of circuit (0V) | 5 | Ground | Ground pins are connected to ground of circuit (0V) | 6 | Output 2 | Connected to another end of Motor 1 | 7 | Input 2 | Directly controls the Output 2 pin. Controlled by digital circuits | 8 | Vcc2 (Vs) | Connected to Voltage pin for running motors (4.5V to 36V) | 9 | Enable 3,4 | This pin enables the input pin Input 3(10) and Input 4(15) | 10 | Input 3 | Directly controls the Output 3 pin. Controlled by digital circuits | 11 | Output 3 | Connected to one end of Motor 2 | 12 | Ground |…
