Skip to content

Cash on Delivery all over Pakistan · Free delivery in Islamabad & Rawalpindi above Rs 5,000

PakCircuit
Hc-12 SI4463 433MHz RF Wireless Serial Module With Antenna
LoRa & RF ModulesCode 22ce3871cc

Hc-12 SI4463 433MHz RF Wireless Serial Module With Antenna

This is copy HC-12 Wireless Transceiver Modules 433Mhz .

Rs 819Rs 1,350-39%
In stock Price updated 15 Nov 2026
Total: Rs 819
  • Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
  • Cash on deliveryPay when your parcel arrives
  • 7-day checking warrantyDead-on-arrival items replaced
  • Packed with careAnti-static & padded packaging

Highlights

  • FU1 - moderate power saving mode with 250000bps “over the air” baud rate. Serial port baud rate can be set to any supported value
  • FU2 - extreme power saving mode with 250000bps “over the air” speed. Serial port rate is limited to 1200bps, 2400bps, 4800bps
  • AT - test command. It will return OK if AT interface is enabled
  • AT+Bxxxx - set serial port baud rate. For example, AT+B57600 set baud rate to 57600bps
  • AT+Px - set device transmitting power. For example AT+P2 sets power to 2dBm (1.6mW) • -1dBm (0.8mW)
  • 2dBm (1.6mW)
  • 5dBm (3.2mw)
  • 8dBm (6.3mW)

About this product

This is copy HC-12 Wireless Transceiver Modules 433Mhz . HC-12 Wireless Transceiver Modules 433Mhz are wireless serial port communication modules and its low quality product with low range. given description is only for standard high quality hc-12 module not for this low quality one. If you want to buy good quality then follow this link

Here you go.

It is based on SI4463 RF chip, it has built in microcontroller, and can be configured using AT commands , Maximum output power is 100mW (20dBm) and receiver sensitivity differs from -117dBm to -100dBm, depending on transmission speed. It accepts 3.2V-5.5V and can be used with 3.3V and 5V UART voltage devices (3.3V safe).

Each HC-12 can work in one of following modes:

•FU3 - default, general purpose mode. “Over the air” speed differs depending on serial port speed. The same goes for maximum range:

•

•FU4 (available in version 2.3 or newer) - long range mode. “Over the air” speed is limited to 500bps and serial port speed to 1200bps. Because air speed is lower than port speed, only small packets can be send: max 60 bytes with interval of 2 seconds. In this mode range is increased to 1800m.

Pair of HC-12 that creates a wireless link has to work in the same mode (FU1, FU2, FU3, FU4) and with the same speed.

HC-12 can be configured using AT command. The best way to do it, is to use USB-to-serial converter like CP2102. To put HC-12 into AT…

Related searches

You may also need

More Wireless & IoT →