DS2501

. Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48-bit serial number + 8-bit CRC tester) assures absolute traceability because no two parts are alike

. Built-in multidrop controller ensures compatibility with other MicroLAN products

. EPROM partitioned into two 256-bit pages for randomly accessing packetized data

. Each memory page can be permanently write-protected to prevent tampering

. Device is an “add-only” memory where additional data can be programmed into EPROM without disturbing existing data

. Architecture allows software to patch data by superseding an old page in favor of a newly programmed page

. Reduces control, address, data, power, and programming signals to a single data pin

. Directly connects to a single port pin of a microprocessor and communicates at up to 16.3 kbps

. 8-bit family code specifies DS2501 communications requirements to reader

The DS2501 512-bit add-only memory identifies and stores relevant information about the product to which it is associated. This lot- or product-specific information can be accessed with minimal interface-for example, a single port pin of a microcontroller. The DS2501 consists of a factory-lasered registration number that includes a unique 48-bit serial number, an 8-bit CRC, and an 8-bit family code (11h) plus 512 bits of EPROM that is user-programmable.

It is a 512Kb add-only memory, often referred to as a 1-Wire EEPROM (Electrically Erasable Programmable Read-Only Memory). The 1-Wire protocol is a communication protocol developed by Dallas Semiconductor (now a part of Maxim Integrated) that allows for communication with devices over a single data line.

Features:…