

CN3302 Type-C 2S Lithium Battery Charger Module - 8.4V Step-Up Boost Charging Board (3-6V USB-C Input)
Charge any 2S (7.4V) Li-ion or Li-Po battery pack from a standard 5V USB Type-C source with this compact step-up (boost) charging board, built around the…
- Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
- Cash on deliveryPay when your parcel arrives
- 7-day checking warrantyDead-on-arrival items replaced
- Packed with careAnti-static & padded packaging
Highlights
- Consonance CN3302 controller - PFM step-up charge management driving an external N+P MOSFET
- Wide USB-C input - works from 2.75V to 6.5V (board rated 3-6V); on-chip UVLO shuts down below ~2.65V
- True CC + Quasi-CV charging - constant current until 8.4V, then reduced-current Quasi-CV, then automatic termination
- Selectable charge current - set by the on-board RCS sense resistors (1A / 2A / 4A solder-jumper versions)
- Solar / weak-adapter friendly - input-power-adaptive function automatically lowers charge current to match a weaker source
- Automatic recharge - resumes charging if the pack drops below the recharge threshold while still plugged in
- Dual status LEDs - CR (charging) and OK (full / constant-voltage)
- Battery over-voltage protection
Specifications
- Controller IC
- Consonance CN3302 (PFM step-up)
- Topology
- Asynchronous boost - external N+P MOSFET + SS34 Schottky + 10µH inductor
- Input
- DC 3-6V via USB Type-C (IC range 2.75-6.5V)
- Output / charge voltage
- 8.4V (2S)
- Charge current
- 0.55A / 1.1A / 2.2A (1A / 2A / 4A version, RCS-set)
- Charge profile
- Constant Current → Quasi-CV → terminate
- Battery type
- 2S Li-ion / Li-Po (18650, 21700, pouch)
- Cell balancing
- No (charges series pack as a whole)
- Fast charge (QC)
- No
- Protections
- Battery OV, input UVLO, short-circuit fold-back, IC over-temp
- LED indicators
- CR = charging, OK = full / CV
- Operating temp
- −40°C to +85°C
- Board size
- ~39 × 18 × 6 mm
About this product
Charge any 2S (7.4V) Li-ion or Li-Po battery pack from a standard 5V USB Type-C source with this compact step-up (boost) charging board, built around the Consonance CN3302 PFM step-up charge controller. It boosts a 3-6V USB-C input up to a regulated 8.4V using a true constant-current + Quasi-CV charge profile, with an external N+P power MOSFET, SS34 Schottky, and 10µH inductor for reliable energy transfer. Ideal for DIY power banks, 18650/21700 packs, robotics, solar projects, and portable electronics.
⚠️ 5V USB-C input ONLY. Do NOT apply 12V or anything above 6V - it will destroy the board. For a 12V source you need a buck (step-down) 2S charger, not this boost module.
Key Features
•
•
•
•
•
•
•
How It Charges
On power-up the CN3302 begins constant-current charging. As the pack approaches 8.4V it enters Quasi-CV mode (charge current is reduced) to compensate for voltage drop across the cells' internal resistance, then terminates cleanly. If the battery later falls…
Related searches
You may also need
More Batteries & Power →








