

Cjmcu-9548 TCA9548A 1-to-8 I2c 8-channel Iic Multiplexer Multi-channel Expansion Development Board For Arduino
You just found the perfect I2C sensor, and you want to wire up two, three, or more of them to your Arduino.
- Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
- Cash on deliveryPay when your parcel arrives
- 7-day checking warrantyDead-on-arrival items replaced
- Packed with careAnti-static & padded packaging
Highlights
- 1-to-8 Bidirectional Translating Switches.
- Supports Hot Insertion.
- Low Standby Current.
- Active-Low Reset Input.
- Power Up With All Switch Channels Deselected.
- I2C Bus and SMBus Compatible.
- 5-V Tolerant Inputs.
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
About this product
You just found the perfect I2C sensor, and you want to wire up two, three, or more of them to your Arduino. When you realize “Oh no, this chip has a fixed I2C address, and from what I know about I2C; you cannot have two devices with the same address on the same SDA/SCL pins”. Are you out of luck? You would be if you don’t have this cool CJMCU TCA9548A I2C 8 Channel Multiple extensions development board. The CJMCU TCA9548A I2C 8 Channel Multiple extensions development board is interesting in that it has an I2C address (0x70 by default) - and you basically send it a command to tell it which I2C multiplexed output you want to talk to, then you can address the board you want to address. Robu.in have a different kind of breakout boards; for more boards Click here . Specification and Features : • 1-to-8 Bidirectional Translating Switches. • Supports Hot Insertion. • Low Standby Current. • 1-to-8 Bidirectional Translating Switches. • Active-Low Reset Input. • Power Up With All Switch Channels Deselected. • I2C Bus and SMBus Compatible. • 5-V Tolerant Inputs. • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II. Pin Description : Power Pins: •
Vin - this is the power pin. Since the sensor chip uses 3-5 VDC. To power, the board, give it the same power as the logic level of your microcontroller - e.g. for a 5V micro like Arduino, use 5V. •
GND - common ground for power and logic. I2C Control-Side pins : •
SCL - this is the I2C clock pin for the chip itself, connect to your microcontrollers I2C clock line. •
SDA - this is the I2C data pin for the chip itself, connect to your microcontrollers I2C data line. •
RST - this is the reset pin, for resetting the multiplexer chip. Pulled high by default,…







