

Battery Protection Board 4s 20A 14.8V BMS For 18650 Lithium Ion Cells HX-4s-A20
A battery management system (BMS) is an electronic regulator that monitors and controls the charging and discharging of rechargeable batteries .
- Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
- Cash on deliveryPay when your parcel arrives
- 7-day checking warrantyDead-on-arrival items replaced
- Packed with careAnti-static & padded packaging
Highlights
- The high-accuracy voltage detection circuit
- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit)
- MOS transistor can control the battery charge and discharge
- low standby current consumption.
- Small size.
- Simple wiring.
- Targeted.
- Custom installation.
Specifications
- Over-Discharge Voltage
- 2.3-3.0v±0.05v
- Max working current
- 10A
- Working Temperature
- 40---+50
- Small current
- 6uA
- Life cycle
- 50000hours
- Short cut Protection
- Protectable
About this product
A battery management system (BMS) is an electronic regulator that monitors and controls the charging and discharging of rechargeable batteries . Battery BMS protection boards are the brains behind battery packs. 20A 4S BMS manages the output, charging, and discharging and also provides critical safeguards to protect the batteries from damage. 18650 protection circuit Board is a high-accuracy voltage detection circuit. The 20A protection board can be used for lithium-ion Phosphate batteries, Low power inverters, massager battery packs, electronics, LED light backup power supplies, solar street lights battery packs and many other products Features of 4S 20A BMS Protection PCB Board for 18650 Lithium Li-ion Battery Cell 14.8V: • The high-accuracy voltage detection circuit • Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit) • MOS transistor can control the battery charge and discharge • low standby current consumption. • Small size. • Simple wiring. • Targeted. • Custom installation. Specifications Of Lithium Battery Protection Board Overcharge Short Circuit Over-Discharge Current Limit Protection: • Over Charge Voltage :4.25-4.35v±0.05v • Max Peak Current :20A • Storage Temperature :-40-- +80 • Resistance :45mΩ • Size :35*35*3.0mm Using Attention: •
Please strictly follow the wiring diagram: 0V (B-), 3.7V (B1), 7.4V (B2), 11.1V (B3), 14.8V (B+), do not intentionally short-circuit! • After connecting the wire, it needs to be charged before it has output. • In series 4 batteries, please ensure that the voltage of each battery is the same. If it is different, please charge each battery separately and then use it in series. In the discharge…
Related searches
You may also need
More Batteries & Power →








