-28%
Arduino UNO R3 SMD - Economic WITH CABLE
ATmega328-AU microcontroller with UNO Bootloader Installed.
- Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
- Cash on deliveryPay when your parcel arrives
- 7-day checking warrantyDead-on-arrival items replaced
- Packed with careAnti-static & padded packaging
Highlights
- ATmega328-AU microcontroller with UNO Bootloader Installed.
- USB Programming Facilitated by the CH340G.
- USB-B Connector and cable included.
- Input voltage - 7-15V.
- 0-5V outputs with 3.3V compatible inputs.
- 14 Digital I/O Pins (6 PWM outputs).
- 6 Analog Inputs.
- ISP Header.
Specifications
- Microcontroller
- ATmega328
- Operating Voltage
- 5 V
- Input Voltage
- 5-12 V
- Digital I/O Pins
- 14 (of which 6 provide PWM output)
- Analog Input Pins
- 6
- DC Current per I/O Pin
- 40 mA
- Flash Memory
- 32 KB (of which 0.5 KB used by bootloader)
- SRAM
- 2 KB
- EEPROM
- 1 KB
- Clock Speed
- 16 MHz
About this product
•32k Flash Memory.
•16MHz Clock Speed.
•All SMD Construction.
•R3 Shield Compatible
Arduino UNO R3 SMD
Arduino UNO R3 SMD is a version of the Arduino Uno, but uses an surface mount version of the Atmega328 P instead of the through-hole version. This version was made in response to a shortage in supply of the through-hole Atmega328P . The board is based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter.
This is the SMD version. This version has the ATmega chip is surface mounted to the board, so the chip cannot be easily replaced, unlike the original where the chip can be easily pulled out and replaced. Performance will be the same as the original.
ATmega328
5 V
5-12 V
14 (of which 6 provide PWM output)
6
40 mA
