Skip to content

Cash on Delivery all over Pakistan · Free delivery in Islamabad & Rawalpindi above Rs 5,000

PakCircuit
4S 100A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
BMS & Charging ModulesCode 7ee9056a84

4S 100A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module

• Model: HX-4S-F100A • Supported Battery Type: 3.2V LiFePO4 batteries • Configuration: 4S (4-Cell) • Voltage Rating: 12.8V / 14.4V • Protection: Integrated…

Rs 1,450
In stock Price updated 15 Nov 2026
Total: Rs 1,450
  • Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
  • Cash on deliveryPay when your parcel arrives
  • 7-day checking warrantyDead-on-arrival items replaced
  • Packed with careAnti-static & padded packaging

Highlights

  • strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, do not deliberately short circuit.

Specifications

Model
HX-4S-F100A
Supported Battery Type
3.2V LiFePO4 batteries
Configuration
4S (4-Cell)
Voltage Rating
12.8V / 14.4V
Overcharge protect delay
1.5-2.5S
Overcharge protect Current
100A
Over-discharge protect Current
100A
Over-discharge protect delay
0.5-1.5S
Disconnect protect
Yes
Shortage protect
Yes
Shortage delay
100-600 uS

About this product

4S 100A BMS PCB 12.8V-14.8V Li-ion Lifepo4 4 cell 32700 Batteries Protection Board With Balance Protection

This HX-4S-F100A based 100A BMS board is also called (a battery management system ). HX-4S-F100A is a protection board for lifepo4 26700/32700 cells. There are 10 MOSFET’S, a strong heat-dissipating aluminum sheet installed on it, and the continuous current limit is 100A. It is suitable for 3 series lithium battery packs such as inverter, xenon lamp, and solar street lamp.

•Single cell battery overcharge protect voltage: 3.61-3.69 V

•Single cell battery overcharge protect recover voltage: 3.5-3.6V

•Single cell battery over-discharge protect voltage: 2.27-2.43 V

•Single cell battery over-discharge protect recover voltage: 2.45-2.65 V

1 x 3S 11.1V High Current 100A 3.7V Lithium Battery Protection Board With Balance

•The successful start of the drill requires three 15C-20C power battery, six 10C-15C power battery (ordinary 18650 can not start the drill!!).

•When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor’s positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.

•3 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.

•For some of the poor basis of electronic customers to explain: balanced charge is only auxiliary functions, try not to put a good battery and poor battery mixed together! 3 sets of battery…

Related searches