Skip to content

Cash on Delivery all over Pakistan · Free delivery in Islamabad & Rawalpindi above Rs 5,000

PakCircuit
3S 100A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
BMS & Charging ModulesCode d6da037c8d

3S 100A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module

3S 100A 12.6V Cell 18650 Li-ion Lithium Rechargeable Battery Charging 3 cell BMS Battery charge protection PCB Board with over-voltage protection charging…

Rs 1,300Rs 1,450-10%
In stock Price updated 15 Nov 2026
Total: Rs 1,300
  • Delivery in 2 to 4 working daysFree in Islamabad & Rawalpindi above Rs 5,000
  • Cash on deliveryPay when your parcel arrives
  • 7-day checking warrantyDead-on-arrival items replaced
  • Packed with careAnti-static & padded packaging

Highlights

  • strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, do not deliberately short circuit.

About this product

3S 100A 12.6V Cell 18650 Li-ion Lithium Rechargeable Battery Charging 3 cell BMS Battery charge protection PCB Board with over-voltage protection charging module. Buy online in Pakistan

3S 100A BMS PCB 11.1V 12.6V Li-ion Lithium ion 3 cell 18650 Batteries Protection Board With Balance Protection

This HX-3S-F100A based 100A BMS board is also called (a battery management system ). HX-3S-F100A is a protection board for li-ion 18650 cells. There are 10 MOSFET’S, a strong heat-dissipating aluminum sheet installed on it, and the continuous current limit is 100A. It is suitable for 3 series lithium battery packs such as inverter, xenon lamp, and solar street lamp.

•Overcharge voltage range: 4.28v±0.05v; Over-discharge voltage range: 2.5±0.05v; Upper limit working current: 100A (pay attention to heat dissipation).

•Charging voltage: 12.6V-13V; Charging current upper limit: 10A; For discharge products above 3A, the discharge rate of the battery should be more than 3C.

•Strictly according to the diagram wiring 0V (B-), 3.7V (B1), 7.4V (B2), 11.1V (B +), C-charge negative, C + charge positive, P- output negative P + output positive.

1 x 3S 11.1V High Current 100A 3.7V Lithium Battery Protection Board With Balance

•The successful start of the drill requires three 15C-20C power battery, six 10C-15C power battery (ordinary 18650 can not start the drill!!).

•When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor’s positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.

•3 groups of batteries in series, please ensure that the…

Related searches